It is base for the jewelry makers to have the skills to use the tools. One integral skill which is must owned by the jewelry makers is using the soldering tool to solder jewelry.
Some habitancy reconsider that it is safer to melt and attach the jewelry using the iron. You will also find it is easier to join the jewelry with that tool than using the blow torch. However, to do that, you will need the technique which is distinct from the old torch soldering. You also need to pay attention in selecting the metal. The iron can only be used on the basic metals like the tin or the copper.
Soldering Stations Soldering Equipment
Before you do that, you will need to put in order some tools like the soldering iron, solder, the soldering tape, the metal jewelry to be soldered, and the soldering blocks.
Best Price Weller WTCPT 60 Watts/120V Temperature Controlled Soldering Station
Weller WTCPT 60 Watts/120V Temperature Controlled Soldering Station Feature
- Unique closed loop temperature control protects sensitive components
- Ferromagnetic sensor in tip controls temperature, so no adjustment is required
- Most tips available in three standard temperature ranges (600 F, 700° F, 800° F) for maximum control
- Lighted rocker switch indicates on-off status
- Pencil uses PT series tips
Weller WTCPT 60 Watts/120V Temperature Controlled Soldering Station Overview
Weller WTPCT Soldering Station - 60 Watt Temperature Controlled. PU120T power unit, TC201T soldering pencil, PH1201ESD stand and sponge. UL ListedAvailable at Amazon Check Price Now!
Related Products
- Hakko Tip Cleaner, 599B-02, Non-Corrosive, No Water Needed
- Weller PTP7 1/32" Conical Soldering Iron Tip For WCTPT 700°F
- Weller PTM7 1/8" Long Screwdriver Soldering Tip For WCTPT
- Weller Soldering Tip, .031", Long Conical, 700 Deg., PT
- SEPTLS185PTA7 - PT Series Soldering Iron Tips
Customer Reviews
*** Product Information and Prices Stored: Jul 29, 2012 01:45:10
The first thing you should do is pushing the two metal pieces together. If you do it correctly, the pieces will sit flushing against each other. You need to keep the gap is as thin as possible. After that, you will need to place the tape on the piece's covering which is not made from the metal. You can put it on the glass for example where you will melt to the pieces of the metal.
Do not forget to heat your iron while you do that. After it heats up, you can touch the tip of your tool to the area you want to join for seconds. Press the tip a little to the gap where the two pieces join together. You have to heat the iron's tip until the solder can flow to the gap. After you have done, do not forget to cool the area. Do not touch it with your bare hands. Let it cool until it has the room temperature.
Soldering Your Jewelry With the Soldering IronVisit : Band Saws Woodworking Tools Arc Welding Equipment Power Tools Cordless Staplers
No comments:
Post a Comment